HELIOTEC 120W 150W 180W MPPT Micro Inverter Balcony PV Grid Tie System for Home Use DC10.8-30V Solar Input AC110V-240V Output

Product Description:

The GMI. Series 120W 150W 180W Solar Grid Tie Micro Inverter is a high-quality and compact device that effectively converts DC power into AC power for home and office appliances. The AC output of the smart micro inverter is synchronized and in-phase with the utility grid, ensuring the smooth and efficient transfer of electricity.
This micro inverter is designed to operate with solar panels only and has an input voltage range of 10.8V-30V. It can handle a maximum solar panel power of 120W 150W 180W and features MPPT range of 12.5V-25V. It is a great choice for those who want to reduce their carbon footprint and save on electricity bills.

Specifications:

Maximum Output Power: 120W/150W/180W
Rated Output Power: 110W/140W/160W
DC Input: 10.8V-30V
AC Output Voltage: 120V/240V
Frequency Range: 50/60HZ Auto
MPPT Voltage Range: 12.5V-25V
Solar Panel Voltage: Vmp12.5V-25V; Voc10.8V-30V
Solar Panel Power: maximum 120W/150W/180W
Certification: CE

User notice:

This equipment is an ON-GRID Microinverter and must be correctly connected to the power grid to work properly. When the power grid stops working, it will also stop generating.
Do not exceed PV panel(s) voltage over the inverter max input voltage (Voc＜30V).
Do not exceed PV panel(s) power over the inverter max input power.
The positive and negative poles of the solar panel cannot be reversed. Be careful when extending the solar panel cable.
Install the inverter away from direct sunlight and direct rain exposure in a ventilated, dry, and cool place.
The inverter may generate heat during operation, which is normal. The inverter has over-temperature protection, and if the temperature is high, it will automatically reduce the working output efficiency or stop working. After cooling down, it will restart.
We have upgraded the drive of the inverter to better protect it. If the inverter reaches a certain temperature, it will lose half of its power. When the thermal temperature drops to normal, it will output full power again. If it still cannot output full power, disconnect and reconnect.

INSTALLATION PROCEDURES

*Prior to installing the Microinverters, Please verify that the utility voltage at the point of common grid connection matches the voltage rating on the Microinverter label.
Step 1- Attaching the Microinverters to the Racking.
a. Mark the location of the Microinverter on the rack, with respect to the PV module junction box or any other obstructions.
b. Mount one Microinverter at each of these locations using hardware ecommended by your module racking vendor.
Step 2 – Connecting the Microinverter AC cable and connectiong to AC bus cable(L-BROWN,N-BLUE,GGREEN&YELLOW) one by one, Please do NOT exceed the Maximum current of AC bus cable .
Step 3 – Connecting Microinverters to the PV Module,Please do NOT exceed PV panel(s) VOC over inverter max input voltage.
Step 4 – Install the AC Branch Circuit Junction Box,Wire the conductors of the AC bus cable. Connect the AC branch circuit junction box to the point of utility-grid Interconnection.
Step 5 – Double check all Microinverters, connectors and cables are correctly and well connected.
Step 6 – Turn ON the AC circuit breaker on each AC branch circuit of Microinverter .
Step 7 – Turn ON the main AC circuit breaker of utility-grid. Your system will start producing powerafter a 3sec safety delay period.